Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about […]
Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you […]
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:
Mike,
I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.
If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.
The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.
Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.
The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.
Thanks,
WarriorClass
III
My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so. –
M14 Scope Mounts
Gun Accessories
1/19/2010 7:00:27 PM 44mag Top Gun Supply Whamo [Member] 1/19/2010 10:16:08 PM Natchez Shooters Supplies Midway edit – Great service from both. They both have printed catalogs – Midway’s catalog is just plain awesome, Natchez’ is small but nice. Kodiak-AK
1/19/2010 7:00:27 PM 44mag Top Gun Supply Whamo [Member] 1/19/2010 10:16:08 PM Natchez Shooters Supplies Midway edit – Great service from both. They both have printed catalogs – Midway’s catalog is just plain awesome, Natchez’ is small but nice. Kodiak-AK
Mesa Tactical
Mesa Tactical –
Mesa Tactical –
- Patches – MIL-SPEC MONKEY STORE
- Patches – MIL-SPEC MONKEY STOREMonkey Made Morale Patches … For those who always seem to find a way to suck the fun out of everything. – Patches – MIL-SPEC MONKEY STOREMonkey Made Morale Patches … If you are going … Continue reading →
Witness:
Witness: SANTA ANA, Calif. (AP) — A forensic specialist testified Monday that two
“This is not a done deal today,” said
“This is not a done deal today,” said Council member Claudia Walters, who represents the district where the development would be built. “This is a kicking off of the public process.” Councilman Tom Rawles voted against the motion for a reason he did not want to discuss publicly. Rawles said he was concerned with an […]
“This is not a done deal today,” said Council member Claudia Walters, who represents the district where the development would be built. “This is a kicking off of the public process.”
Councilman Tom Rawles voted against the motion for a reason he did not want to discuss publicly.
Rawles said he was concerned with an item on the incentive list. Mayor Keno Hawker abstained because his back yard abuts the mall site.
A pedestrian-oriented theater district on 30 acres would be the first phase of construction, which could begin in about 18 months.
That includes a 57,000 square-foot Cinemark theater, the second the national chain would locate in Arizona, and 103,000 square feet of retail space.
“This is going to be a place where you want to be,” said head architect Robert Saemisch of Saemisch DiBella Architects Inc., which will design the theater.
Future phases include the Bass Pro store on 25 acres, a 110-acre retail district where the Super Wal-Mart would locate, a 30-acre auto mall and a 45-acrecommerce park.
Bass Pro Shops, an outdoor sporting-goods giant that sells everything from rods and rifles to hunters’ underarm deodorant and camouflage infant booties, attracts millions of tourists annually.
The Missouri-based chain is opening its first Western store in Las Vegas on Nov. 11. Saemisch estimated that the 180,000- to 200,000-square-foot store in Mesa Tactical could attract 2 million tourists a year.
The developers’ proposal will be considered at several City Council sessions and planning and zoning meetings.
The city also plans to hold several public meetings on the development.
markm
8/20/2004 12:19:37 PM
But Tempe Mayor Hugh Hallman didn’t see it as a battle, instead hoping both developments could “complement each other” and become a regional retail force.
Who is Hugh Hallman? I though Tempe’s mayor was that Peter Puffing Homo, Neil Guliano!
(Hugh must be his Homeland Security Advisor.)
mylhouse
8/20/2004 12:42:25 PM
I think Guiliano finally retired to go chug cock elsewhere than the upsidedown pyramid…
TimW
8/20/2004 6:22:17 PM
Guilani retired
Hallman got elected.
The use of taxpayer money to “lure” businesses is repugnant, no matter what business it is.
Will Glendale give a Blimpie’s owner a multi-million (hell—multithousand) dollar tax break like that? I mean…sales taxes in Glendale and jobs, too…?
Answer is no. No city will.
It’s bullshit and taxpayers should be outraged.
TimW
Phoenix
innocent_bystander
8/20/2004 6:38:05 PM
Tim,
I’m sure the city is thinking about their new tax source is trying to bring in buisiness. Maybe a $40 million dollar investment isn’t a bad thing if the city stands to make $10 million a year in income.
TimW
8/20/2004 7:14:59 PM
Originally Posted By innocent_bystander:
Tim,
I’m sure the city is thinking about their new tax source is trying to bring in buisiness. Maybe a $40 million dollar investment isn’t a bad thing if the city stands to make $10 million a year in income.
Why don’t they try creating a business environment where they don’t have to give taxpayer-funded bribes/kickbakcs/payoffs (which is all this is) in order to attract businesses.
I can’t imagine that residents wouldn’t like their portion of the $40 million instead of it going to a government-funded giveaway.
Tim
tfod
8/20/2004 8:42:42 PM
Better than spending money on a stadium.
TimW
8/21/2004 12:10:42 AM
Originally Posted By tfod:
Better than spending money on a stadium.
Tell me about it. I spent enough of my own money trying to get it stopped.
TimW
(Glendale) AZ
The_Macallan
8/21/2004 12:50:50 AM
I’m with TimW on this one. I’m repulsed by the basic principle of using taxation as a means to coerce or bribe individuals to do or not do something.
SPECTRE
8/21/2004 11:36:46 PM
Originally Posted By The_Macallan:
I’m with TimW on this one. I’m repulsed by the basic principle of using taxation as a means to coerce or bribe individuals to do or not do something.
AMEN !!
–
Mesa Tactical
Ak-47 Stocks – Ruger 10/22 Accessories
aimpoint compm4; aimpoint micro; aimpoint scopes; aimpoint t1; AK 47 Stocks; AK 47 Tools; AK-47 Accessories; AK-47 Folding Stock; AK-47 Furniture; AK-47 Handguards
Aimpoint Comp M4
I have a Aimpoint Comp M4 in a QRP mount that I bought a magnifier for and did not like the twist mount so I ended up buying a LaRue pivot mount LT755 to replace it. I didn’t realize it, but the LaRue pivot mount sits higher than the Aimpoint Comp M4 in the QRP […]
I have a Aimpoint Comp M4 in a QRP mount that I bought a magnifier for and did not like the twist mount so I ended up buying a LaRue pivot mount LT755 to replace it. I didn’t realize it, but the LaRue pivot mount sits higher than the Aimpoint Comp M4 in the QRP mount. Any suggestions to get them to line up other than buying the LaRue LT659 mount for the M4? I’d have just left it alone and stuck with the twist mount rather than having to buy 2 mounts. opticsplanet [Industry Partner] 2/7/2012 4:35:56 PM Do you have this spacer installed on your CompM4? http://www.opticsplanet.net/aimpoint-standard-ar15-spacer-for-qrp2-qrw2.html Chase B. Freaky